FADAL downloaded program not readable.


Results 1 to 3 of 3

Thread: FADAL downloaded program not readable.

  1. #1
    Member
    Join Date
    Jan 2006
    Location
    usa
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default FADAL downloaded program not readable.

    Any ideas why a program loaded would look like this? The Fadal was working fine with download and dripfeed until the Power Supply was changed in the PC by computer shop.

    Thanks for any infoFADAL downloaded program not readable.-img_5289-jpgFADAL downloaded program not readable.-img_5290-jpg

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1451
    Downloads
    0
    Uploads
    0

    Default Re: FADAL downloaded program not readable.

    Looks like the serial settings may be incorrect. Are you using CD,8 for 9600 Baud?



  3. #3
    Member
    Join Date
    Jan 2006
    Location
    usa
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default Re: FADAL downloaded program not readable.

    Yes



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

FADAL downloaded program not readable.

FADAL downloaded program not readable.

FADAL downloaded program not readable.