4th axis #18 error


Results 1 to 5 of 5

Thread: 4th axis #18 error

  1. #1
    Member
    Join Date
    Nov 2017
    Location
    Romania
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default 4th axis #18 error

    Today I tryed to use 4th axis. But i can't use CS command because I recive #18 error for A axis. I wanna mention is a VM65 ... and when I can't turn the chuck by hand.

    Best regards,

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2017
    Location
    Romania
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Re: 4th axis #18 error

    Today I change the cards with X cards, error was the same ... axis A. Also today I disassembled the motor, I cleaned the old oil, check the backlash... everything is great there.
    Someone have other suggestion?

    Best regards,



  3. #3
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    285
    Downloads
    0
    Uploads
    0

    Default Re: 4th axis #18 error

    Its probably the AMP-0006 unit. There is a fuse on the board you can check.
    https://www.fadalcnc.com/index.php/amp-0006.html

    Last edited by machinehop5; 09-29-2019 at 05:24 PM. Reason: added fuse


  4. #4
    Member
    Join Date
    Nov 2017
    Location
    Romania
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Re: 4th axis #18 error

    Quote Originally Posted by machinehop5 View Post
    Its probably the AMP-0006 unit.
    https://www.fadalcnc.com/index.php/amp-0006.html
    Can you tell me where is located, maybe a way to check it.. .machine works perfect without 4th axis.
    Today I checked just 1010-5 card.. i didn't know I have other unit responsable with my 4th axis.



  5. #5
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    285
    Downloads
    0
    Uploads
    0

    Default Re: 4th axis #18 error

    Not sure which Model Fadal you have....this is photo of a Model4020. The AMP-0006 is mounted on there
    4th axis #18 error-aug2019-003-painted-jpg



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

4th axis #18 error

4th axis #18 error

4th axis #18 error