4th Axis Inhibit wiring


Results 1 to 8 of 8

Thread: 4th Axis Inhibit wiring

  1. #1
    Member
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1446
    Downloads
    0
    Uploads
    0

    Default 4th Axis Inhibit wiring

    Does anyone have instructions or a schematic on where to install and how to wire the 4th axis inhibit board?
    This is for an older DC machine and running a DC 4th axis.

    Thanks,
    Richard

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1446
    Downloads
    0
    Uploads
    0

    Default Re: 4th Axis Inhibit wiring

    Perfect, that fixed me right up, NOT. All posts are nothing but SPAM!

    Quote Originally Posted by young01 View Post
    Here is a link, I think can help you. https://www.wiringo.com/custom-wiring-harness




  3. #3
    Member
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1446
    Downloads
    0
    Uploads
    0

    Default Re: 4th Axis Inhibit wiring

    I found the wiring schematic. Now, can someone show me where is this board typically mounted when it comes from the factory?

    Quote Originally Posted by rwskinner View Post
    Does anyone have instructions or a schematic on where to install and how to wire the 4th axis inhibit board?
    This is for an older DC machine and running a DC 4th axis.

    Thanks,
    Richard




  4. #4
    Member Mecanix's Avatar
    Join Date
    Aug 2019
    Posts
    283
    Downloads
    0
    Uploads
    0

    Default Re: 4th Axis Inhibit wiring

    Have a look at those pix. See if you can find anything remotely close to what you need to see.
    https://www.google.com/search?rlz=1C...w=1280&bih=625

    Full disclosure; this is not spam



  5. #5
    Member
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1446
    Downloads
    0
    Uploads
    0

    Default Re: 4th Axis Inhibit wiring

    Thanks, that was the first thing I did before posting. No luck.

    Quote Originally Posted by Mecanix View Post
    Have a look at those pix. See if you can find anything remotely close to what you need to see.
    https://www.google.com/search?rlz=1C...w=1280&bih=625

    Full disclosure; this is not spam




  6. #6
    Member
    Join Date
    Sep 2009
    Location
    USA
    Posts
    93
    Downloads
    0
    Uploads
    0

    Default Re: 4th Axis Inhibit wiring

    Go to "FADALCNC.COM" click on "Technical docs". In the lower left you'll see the Header for Wiring diagrams. Click on 4th axis servo options. Page 5 shows you the wiring diagram for the inhibit curcuit.
    In the "Technical tips" section, look under R for rotary and there is a pdf that explains the Inhibit curcuit and where it locates in the cabinet.



  7. #7
    Member rodney247's Avatar
    Join Date
    Jan 2015
    Posts
    329
    Downloads
    0
    Uploads
    0

    Default Re: 4th Axis Inhibit wiring



  8. #8
    Member
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1446
    Downloads
    0
    Uploads
    0

    Default Re: 4th Axis Inhibit wiring

    Got it, thanks. The left side of the cabinet is where all my Renishaw components are mounted. I ended up putting it in the big empty area to the right side of the power supply. I know it seemed like a trivial issue but I kind of like keeping things where they go.

    It is funny that out of all the dozens and dozens of control panel pictures out there, I did not find one that had this inhibit circuit. I take it this was something that was added later as an improvement?

    Richard



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

4th Axis Inhibit wiring

4th Axis Inhibit wiring

4th Axis Inhibit wiring