G-Code


Results 1 to 3 of 3

Thread: G-Code

  1. #1
    Registered
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1389
    Downloads
    0
    Uploads
    0

    Default G-Code

    In the fadal supplied programs, the Workout program for the 4020 has some g-code I'm not familiar with.

    N48(STEP UP THE RPM AND TEST ORIENTATION
    N49M+R3S1000
    N50G4P2500
    N51M19


    What does M+R3 do?

    Also, I take it these programs assume running from machine Zero or E0 ?

    Similar Threads:


  2. #2
    Registered rodney247's Avatar
    Join Date
    Jan 2015
    Posts
    287
    Downloads
    0
    Uploads
    0

    Default Re: G-Code

    did you load the program from fadal memory?

    looks like someone accidentally changed the program its supposed to just be M3S1000 the program is just testing orientation turning spin on, dwell, then orientate

    - - - Updated - - -

    Run from coldstart yes



  3. #3
    Registered
    Join Date
    Oct 2008
    Location
    United States
    Posts
    1389
    Downloads
    0
    Uploads
    0

    Default Re: G-Code

    Yes, it was loaded from eprom. At first, I thought it was a corrupt program but the service program document shows the exact same thing.
    I edited all the entries and made some other changes as well.

    Its the 4020 Workout Program 05819



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G-Code

G-Code