Door Roller Model / Drawing


Results 1 to 2 of 2

Thread: Door Roller Model / Drawing

  1. #1
    Registered
    Join Date
    Jul 2014
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Door Roller Model / Drawing

    Hey everyone,

    I recently acquired a '97 VMC15XT, it has had a pretty normal working life, but is mechanically sound.

    In getting it up and running I noticed the door rollers were ground into dust long ago and need replacing. I would happily make some of my own, the only issue is my current rollers are so hammered I can't even get a good sense of their original shape!

    Does anyone out there have a drawing or model of the door roller assembly I could use? If not I'll just buy a single new one from FadalCNC and measure it.

    Thanks!

    Similar Threads:


  2. #2
    Member
    Join Date
    Jul 2006
    Location
    United States
    Posts
    364
    Downloads
    1
    Uploads
    0

    Default Re: Door Roller Model / Drawing

    pete


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Door Roller Model / Drawing

Door Roller Model / Drawing