Door Roller Model / Drawing

[AndrewCNCRP]

Hey everyone,

I recently acquired a '97 VMC15XT, it has had a pretty normal working life, but is mechanically sound.

In getting it up and running I noticed the door rollers were ground into dust long ago and need replacing. I would happily make some of my own, the only issue is my current rollers are so hammered I can't even get a good sense of their original shape!

Does anyone out there have a drawing or model of the door roller assembly I could use? If not I'll just buy a single new one from FadalCNC and measure it.

Thanks!

Similar Threads:

• Video How to make 3D Drawing in BobCAD V27 from a 3d model
• Newbie- drawing on a 3d model surface
• need help with 2d ortho drawing to 3d model
• Problem- Drawing onto a Solid Model

[slowtwitch]

Here are some on Ebay....

https://www.ebay.com/itm/fadal-door-...8AAOSwa-dWjBES