Need Help! Fadal service and or machine rebuilding?


Results 1 to 2 of 2

Thread: Fadal service and or machine rebuilding?

  1. #1
    Registered
    Join Date
    Jun 2012
    Location
    USA
    Posts
    125
    Downloads
    0
    Uploads
    0

    Default Fadal service and or machine rebuilding?

    We have 2 late 90's Fadals 4020 and 5020. We are located in Wichita, KS. Do any of you know who in this part of the country rebuilds or services these machines? I said rebuild because I bleive the turkite is worn down on the coloum for Z axis on both machines.

    Similar Threads:


  2. #2
    Registered carbidecraters's Avatar
    Join Date
    Apr 2005
    Location
    USA
    Posts
    1194
    Downloads
    0
    Uploads
    0

    Default Re: Fadal service and or machine rebuilding?

    Yes check with these guys... They fly out, spray weld, scrape and replace turcite but you will need a machine to cut the turcite and put in some oiling grooves (And a few $$$)

    Advance Scraping Company | Complete Machine Rebuilding, Way and Box Way Grinding, Re-scraping of machine Ways

    We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts :) If you have a broken down Fadal give a shout.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fadal service and or machine rebuilding?

Fadal service and or machine rebuilding?

Fadal service and or machine rebuilding?