need help with photoelectric sensor

Results 1 to 1 of 1

Thread: need help with photoelectric sensor

  1. #1
    Member iancraggs's Avatar
    Join Date
    Jul 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default need help with photoelectric sensor

    hi guys this is my first post about cnc im new to this


    im looking for some help with an issue im have with wiring up a indexing sensor

    i have converted my manual lathe to cnc which ive got working fine with mach3

    ie: steeper motors

    im trying to wire up a spindle index sensor up ive made the pick up disc with the correct slot on i and mounted it to the lathe shaft
    im struggling to get the sensor to ive got the led light to flash when some thing is passed through
    it but i get nothing on mach3 screen on index pulse light

    the board is wired up to a 24v power supply and a separate one for the motor drivers
    also have a separate 5v supply for the board to work

    i have included a pic ok the sensor im trying to wire up and also a pic of the board im using

    this is the link to the data for the sensor omron ee-sx672a

    https://www.ia.omron.com/product/item/2225/

    any help will be greatly appreciated

    thanks ian

    Similar Threads:
    Attached Thumbnails Attached Thumbnails need help with photoelectric sensor-img_0317-jpg   need help with photoelectric sensor-img_0318-jpg  
    Last edited by iancraggs; 03-06-2019 at 05:24 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need help with photoelectric sensor

need help with photoelectric sensor