- need help with photoelectric sensor
-
Member
need help with photoelectric sensor
hi guys this is my first post about cnc im new to this
im looking for some help with an issue im have with wiring up a indexing sensor
i have converted my manual lathe to cnc which ive got working fine with mach3
ie: steeper motors
im trying to wire up a spindle index sensor up ive made the pick up disc with the correct slot on i and mounted it to the lathe shaft
im struggling to get the sensor to ive got the led light to flash when some thing is passed through
it but i get nothing on mach3 screen on index pulse light
the board is wired up to a 24v power supply and a separate one for the motor drivers
also have a separate 5v supply for the board to work
i have included a pic ok the sensor im trying to wire up and also a pic of the board im using
this is the link to the data for the sensor omron ee-sx672a
https://www.ia.omron.com/product/item/2225/
any help will be greatly appreciated
thanks ian
Similar Threads:
Last edited by iancraggs; 03-06-2019 at 05:24 PM.
-
- need help with photoelectric sensor
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules