Post procesor for my milling machine

Results 1 to 2 of 2

Thread: Post procesor for my milling machine

  1. #1
    Registered
    Join Date
    Oct 2014
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Post procesor for my milling machine

    Hi , I built my own 4 axis dental milling machine. It works under Mach 3 so and I need to adapt the 2015 Delcam Dentmill CAM software for my machine kinematics. Is it possible ? All I know is about to create post procesor .

    Similar Threads:


  2. #2
    Gold Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    4501
    Downloads
    0
    Uploads
    0

    Default Re: Post procesor for my milling machine

    If your milling machine only has four axes, the kinematics aren't too complicated. Set up X, Y, and Z as linear Cartesian axes, and A as a rotary axis parallel to X calibrated in degrees. You can do all that in Mach3. If you know how to create the post-processor for that CAM program, it should just work. If not, you should be able to get help from DelCAM, or Autodesk, which acquired them.

    Is that a picture of your "Babin" machine? It looks more like a lathe than a mill...

    Andrew Werby
    Website


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Post procesor for my milling machine

Post procesor for my milling machine