Huangyang Model HY01D523B different from others.

Results 1 to 6 of 6

Thread: Huangyang Model HY01D523B different from others.

  1. #1
    Registered
    Join Date
    Jul 2017
    Location
    United States
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Huangyang Model HY01D523B different from others.

    I purchased a 220v 1.5KW VFD last year and have only now been able to use it. The screw terminals for R, S, T ; U, V, W & ground are not labeled and the setup is different from examples online of those who have the very same model. Others have 2 rows of the green controller terminals and mine has just one long row. Others have a total of 9 screw terminals on the R,S,T, U, V, W row (usually with terminal for grounding and a brake resistor). Mine has only 7 terminals and the terminals are not labeled. There is a sticker on the outside of the VFD, but on the inside there are 2 embossed symbols (the only apparent labeling of the RST-UVW row that has any apparent labeling) indicating that the 2 outside screws are ground. Has anyone seen this setup and know which terminals are which?Huangyang Model HY01D523B different from others.-img_0227-jpg


    Sent from my iPhone using Tapatalk

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2017
    Location
    United States
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Huangyang Model HY01D523B different from others.

    Quote Originally Posted by Gallen66 View Post
    I purchased a 220v 1.5KW VFD last year and have only now been able to use it. The screw terminals for R, S, T ; U, V, W & ground are not labeled and the setup is different from examples online of those who have the very same model. Others have 2 rows of the green controller terminals and mine has just one long row. Others have a total of 9 screw terminals on the R,S,T, U, V, W row (usually with terminal for grounding and a brake resistor). Mine has only 7 terminals and the terminals are not labeled. There is a sticker on the outside of the VFD, but on the inside there are 2 embossed symbols (the only apparent labeling of the RST-UVW row that has any apparent labeling) indicating that the 2 outside screws are ground. Has anyone seen this setup and know which terminals are which?Huangyang Model HY01D523B different from others.-img_0227-jpg


    Sent from my iPhone using Tapatalk




    Sent from my iPhone using Tapatalk



  3. #3
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    31820
    Downloads
    0
    Uploads
    0

    Default Re: Huangyang Model HY01D523B different from others.

    That's a knockoff or copy, not a "genuine" Huanyang.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  4. #4
    Registered
    Join Date
    Jul 2017
    Location
    United States
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Huangyang Model HY01D523B different from others.

    Quote Originally Posted by ger21 View Post
    That's a knockoff or copy, not a "genuine" Huanyang.
    Thanks for letting me know. I wasn’t sure. I actually got it to work, though I had to guess which terminals were which. It seemed to run. Unfortunately, I had to buy a genuine Huanyang 2.2 KW VFD to run with my 2.2 KW spindle.


    Sent from my iPhone using Tapatalk



  5. #5
    Gold Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    7963
    Downloads
    0
    Uploads
    0

    Default Re: Huangyang Model HY01D523B different from others.

    Quote Originally Posted by Gallen66 View Post
    Thanks for letting me know. I wasn’t sure. I actually got it to work, though I had to guess which terminals were which. It seemed to run. Unfortunately, I had to buy a genuine Huanyang 2.2 KW VFD to run with my 2.2 KW spindle.


    Sent from my iPhone using Tapatalk
    Yes it is not a Huanyang, it may be a Askpower, do the parameters start like this Pn0

    Mactec54


  6. #6
    Registered
    Join Date
    Jul 2017
    Location
    United States
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Huangyang Model HY01D523B different from others.

    To mactec54:

    I’m not sure. I finally got it to work after following the printed label on the front. It functions, but I won’t be able to use it because it is a 1.5 KW VFD and my spindle is 2.2 KW. I bought a “genuine” Huanyang that matches my spindle. After spending all that time trying to figure out how to wire up the VFD with conflicting terminal labels it didn’t take me too long to wire up the new one. So, with my axes now working and my spindle wired, I plan to attempt some initial cuts some time next week!


    Sent from my iPhone using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Huangyang Model HY01D523B different from others.

Huangyang Model HY01D523B different from others.