I purchased a 220v 1.5KW VFD last year and have only now been able to use it. The screw terminals for R, S, T ; U, V, W & ground are not labeled and the setup is different from examples online of those who have the very same model. Others have 2 rows of the green controller terminals and mine has just one long row. Others have a total of 9 screw terminals on the R,S,T, U, V, W row (usually with terminal for grounding and a brake resistor). Mine has only 7 terminals and the terminals are not labeled. There is a sticker on the outside of the VFD, but on the inside there are 2 embossed symbols (the only apparent labeling of the RST-UVW row that has any apparent labeling) indicating that the 2 outside screws are ground. Has anyone seen this setup and know which terminals are which?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk