spindle water cooling system not will working

Results 1 to 3 of 3

Thread: spindle water cooling system not will working

  1. #1
    Registered
    Join Date
    Nov 2014
    Posts
    6
    Downloads
    0
    Uploads
    0

    Unhappy spindle water cooling system not will working

    hi how are you ?

    please can you help me my spindle water cooling system not will working . i think it's about limestone the water bloq on the spindle. can i use the nitric acid to clean it or it wil damage the spindel please help me .

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: spindle water cooling system not will working

    I think nitric acid would destroy your spindle. Phosphoric acid will dissolve limestone deposits and probably won't hurt your spindle. Two commercial products available in USA are Lime-Away and CLR, available at any grocery store. Don't know what you have available.

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Registered
    Join Date
    Nov 2014
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: spindle water cooling system not will working

    but if i une low degree !! .?

    please have you an image about the path that take the wwater inside the spindle



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

spindle water cooling system not will working

spindle water cooling system not will working