ez-Router owners: What kind of drives does your table have?


Results 1 to 5 of 5

Thread: ez-Router owners: What kind of drives does your table have?

  1. #1
    Registered
    Join Date
    Feb 2009
    Location
    USA
    Posts
    102
    Downloads
    0
    Uploads
    0

    Default ez-Router owners: What kind of drives does your table have?

    Just curious to know what kind of stepper drives ez-Router provided with your table. Browsing around their site, I was under the impression all of their tables came with Gecko G201 drives because of this link: http://www.ez-router.com/index.asp?P...PROD&ProdID=60

    However, my table came equipped with drives from RTA Pavia. I got some information about them from the manufacturers website, but it has been extremely hard to find customers who have these drives so I can get their feedback on them (good or bad).

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2009
    Location
    USA
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    i have 2 machines from ez-router. my first one came with gecko drives. when i was purchasing my new machine they explained that they had gone to a Sanyo drive. They are now using a sanyo motor and drive. I was a bit sceptical at first but i trusted them. i am very pleased with my newest machine the new drives run faster and smoother than the geckos did. I have the same motors on both machines but different drives and the sanyo will definately out perform the geckos. i am considering upgrading my geckos to sanyos in the near future.

    Scott



  3. #3
    Member
    Join Date
    Sep 2005
    Location
    Indonesia
    Posts
    1195
    Downloads
    0
    Uploads
    0

    Default

    Hello,
    What is sanyo drive? Let me know the website! Just heard the first time.n Thanks.



  4. #4
    Registered
    Join Date
    Jan 2010
    Location
    K.S.A
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hello, could some body help ,i want to build my own plasme cutting table 6000mmx3000mm. i need to know how i should start such ,motor type , controler, ect...

    Thanks,



  5. #5
    Registered
    Join Date
    Jan 2005
    Location
    usa
    Posts
    59
    Downloads
    0
    Uploads
    0

    Default

    if your looking to build your own check out cncrouterparts.com their stuff is really nice and it takes all the guess work out of building the frame. Thier prices are also very good.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ez-Router owners: What kind of drives does your table have?

ez-Router owners: What kind of drives does your table have?