Hobart 500534R Controller?


Results 1 to 3 of 3

Thread: Hobart 500534R Controller?

  1. #1
    Registered
    Join Date
    Jul 2011
    Location
    United States
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default Hobart 500534R Controller?

    Hi, everyone,

    I hope I'm in the right forum.
    I've already built a CNC machine, which works amazingly, so now it's time to move to the next level, a plasma CNC machine. I have a Hobart 500534R and I looked in all CNCZone for information about how to interface it with Mach3. Has anyone know, or heard if this is even possible with this model of Hobart? I know it's an entry level plasma cutter, but there's always some genious out there that manages to do the impossible.

    Thanks in advance for any info.

    Gustaav.

    Similar Threads:


  2. #2
    Member
    Join Date
    Jul 2005
    Location
    USA
    Posts
    2415
    Downloads
    0
    Uploads
    0

    Default Re: Hobart 500534R Controller?

    You need to post this in the general forum : Several THC makers can tell you how to hook up virtually any plasma that will arc-start in the air (without having to touch the metal ) Hobart is a Miller. Never saw that model before but almost all plasma cutters work the same way.

    TOMcaudle
    www,candCNC.com



  3. #3
    Registered
    Join Date
    Jul 2011
    Location
    United States
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default Re: Hobart 500534R Controller?

    Oops…sorry. I'll try that forum.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hobart 500534R Controller?

Hobart 500534R Controller?