Need Help! EZ CAM File converted

Results 1 to 8 of 8

Thread: EZ CAM File converted

  1. #1
    Registered
    Join Date
    Dec 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default EZ CAM File converted

    Hey Guys,

    Would anyone be able to convert a file over for me? I have an old file that I have from when i use to use V19. I no longer have the software and just want to know if someone can open the file for me and save it as a DXF.

    Thanks for the help!

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member
    Join Date
    Dec 2012
    Location
    The Netherlands
    Posts
    392
    Downloads
    0
    Uploads
    0

    Default Re: EZ CAM File converted

    Hi Vulcan,

    I'am now not at the workshop but tomorrow I can convert your file to DWG/DXF or IGES.
    At home I use sometimes the demo version of our 2016-v23 license at the shop, results shown in the attachments

    Regards,
    Heavy_Metal.

    Attached Thumbnails Attached Thumbnails EZ CAM File converted-anchor-1-jpg   EZ CAM File converted-anchor-2-jpg  


  3. #3
    Registered
    Join Date
    Dec 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: EZ CAM File converted

    That would be awesome!!! The DWG/DXF would be perfect if you dont mind! I really appreciate the help.



  4. #4
    Member
    Join Date
    Dec 2012
    Location
    The Netherlands
    Posts
    392
    Downloads
    0
    Uploads
    0

    Default Re: EZ CAM File converted

    Hi Vulcan,

    Did you machine the file, I see that you miss 2 pockets, image #4.
    The result of the DXF would be like image #3.
    At home I can't save the file, tomorrow I'll send you the correct one.

    Regards,Heavy_Metal.

    Attached Thumbnails Attached Thumbnails EZ CAM File converted-anchor-3-jpg   EZ CAM File converted-anchor-4-jpg  


  5. #5
    Registered
    Join Date
    Dec 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: EZ CAM File converted

    Hey Heavy_Metal,

    Yep, I machined the file. I just engraved it as pockets on an aluminum panel. I use to make custom crab pots with these files.
    Image 3 looks like it should be good for me. I probably separated the other pockets for some reason but I dont remember why, its been a few years.
    Thanks again for the help!



  6. #6
    Member
    Join Date
    Dec 2012
    Location
    The Netherlands
    Posts
    392
    Downloads
    0
    Uploads
    0

    Default Re: EZ CAM File converted

    Hi Vulcan,

    The Zip-file contains 2 different DWG and DXF files, the #1 are the original with dots in the pockets, EZCAM shows them as green triangles, see image #5.
    I removed them in the #2-files, I also saved the DXF as ASCII and Binary DXF-files.
    I hope it will work for you.

    Regards,
    Heavy_Metal.

    -----------------------------------------------------------------------------------------------------------------------

    Attached Thumbnails Attached Thumbnails EZ CAM File converted-anchor-5-jpg  
    Attached Files Attached Files


  7. #7
    Registered
    Join Date
    Dec 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: EZ CAM File converted

    Hey Heavy_Metal,

    That works perfect!! Thanks a lot for your help Heavy_Metal! I really appreciate it!



  8. #8
    Member
    Join Date
    Dec 2012
    Location
    The Netherlands
    Posts
    392
    Downloads
    0
    Uploads
    0

    Default Re: EZ CAM File converted

    Hey Vulcan,

    You’re welcome.

    Heavy_Metal.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EZ CAM File converted

EZ CAM File converted