Help! I deleted the firmware from my DSP controller - Page 4


Page 4 of 5 FirstFirst 12345 LastLast
Results 61 to 80 of 82

Thread: Help! I deleted the firmware from my DSP controller

  1. #61
    Registered
    Join Date
    Mar 2009
    Location
    Romania
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default

    Hello i had the same problem with my dsp maxim speed 10000mm/m. the answer is simple find the "output pulse" in the menu and change the "pulse width" smaller i think that now is 7 in your case try it 5 and the see what is happened if it's not enought try 3



  2. #62
    Registered
    Join Date
    Jan 2013
    Location
    South Africa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hi All

    Willem here from South Africa

    We have Ruijie CNC maschine with the DSP 501n Controller

    I have error screen on my DSP controller handset.
    "C driver error, press any button to reboot ......"

    It seems to be frozen on this message no reboot.

    I run Windows 7 and it does not reconize the controller and the sentek software seems to be useless.

    Please if one of you cnc boffins out there could assist me it will be awsome thanks



  3. #63
    Registered nogeso's Avatar
    Join Date
    Jun 2004
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Hi
    Does anyone still have this problem? I got this problem with my DSP Controller this weekend. After a lot of struggle I found out that I had enabled the setting for hard limit switches in the Machine setup. This was done deliberately because I believed that I had hard limit swithes, doubling as both Hard limit and Home park switches. My chinese mill only have Home Park switches. Hard limit switches are two switches at every axes one in + and one in - direction. Home park switches are only one switch at each axes and at the Home Park Position end.

    regards
    nogeso



  4. #64
    Registered nogeso's Avatar
    Join Date
    Jun 2004
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Hi again
    the problem I am referring to in my posting above is the following: error message "Z-hard Limit trigged, STOP to reboot, DELETE to adjust z position".
    Forgot sto specidy

    Regards
    nogeso



  5. #65
    Registered
    Join Date
    Mar 2009
    Location
    Romania
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default

    Pleas explain the exact steps you did and i will help you resolve your problem



  6. #66
    Registered nogeso's Avatar
    Join Date
    Jun 2004
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    hi mecanicu

    As I wrote in my email I have solved the problem - in machine setup disable the hard limit switches and the problem is solved

    regards

    nogeso



  7. #67
    Registered
    Join Date
    Oct 2016
    Location
    Slovakia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: DSP problems!!!! please help

    -Pulse equivalence: x400 y 400 z800 There is an error !!! x,y,z 163,05 no 400 !!!!



  8. #68
    Registered
    Join Date
    Oct 2016
    Location
    Slovakia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: help me I want firmware or BOOT RZNC-0504

    Do the hard reset! Following ... turn off the machine!

    Hold down the button on RZNC (OK) when you turn on the machine ...
    * select Reset, factory set ..
    * Enter the settings for your machine ...
    old problem would be removed



  9. #69
    Registered
    Join Date
    Jun 2016
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Help! I deleted the firmware from my DSP controller

    Hi, I badly need those file so i can recover my DSP controller program. I have accidentaly deleted my DSP software, and now, my screen is blank.



  10. #70
    Registered
    Join Date
    Oct 2016
    Location
    Slovakia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Help! I deleted the firmware from my DSP controller

    what has to do with the DSP window ???
    I do not understand what's going on ...



  11. #71
    Registered
    Join Date
    Jun 2016
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Help! I deleted the firmware from my DSP controller

    my DSP windows shows nothing, only blank screen. please send to me your email so i can send all pictures.

    Attached Thumbnails Attached Thumbnails Help! I deleted the firmware from my DSP controller-2-jpg   Help! I deleted the firmware from my DSP controller-3-jpg  


  12. #72
    Registered
    Join Date
    Oct 2016
    Location
    Slovakia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Help! I deleted the firmware from my DSP controller

    ok ... turn off the machine and ON . Software should be drawn into the device itself ...



  13. #73
    Registered
    Join Date
    Mar 2013
    Location
    TR
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Help! I deleted the firmware from my DSP controller

    Hi,
    Somebody send me label and menu file
    0501_1.0_Menu E.txt
    Zhblabel501_E_V17.label



  14. #74

    Default Re: Help! I deleted the firmware from my DSP controller

    I've cnc routet cutting machine and dsp 501. I need in making diagrams transfering it to dsp and then operating cnc router. Your instructions will be much appreciated.

    Sent from my SM-J700M using Tapatalk



  15. #75
    *Registered User* paolopaulpaul's Avatar
    Join Date
    Nov 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Talking Re: Help! I deleted the firmware from my DSP controller

    Quote Originally Posted by Big S View Post
    The DSP program can be reinstalled using the signtek software, (been there done that) you also need the software file( it should be something like 'Setup(RZTH501)_E_200721'

    Cenicero, can you pm me your email address and I will send you the English version of the host program. Its 6MB+

    Thanks,

    Shannon.
    Hi,

    I know that this post is old

    I need please the signtek software.

    Please can you send me?



  16. #76
    *Registered User* paolopaulpaul's Avatar
    Join Date
    Nov 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: firmware

    Would you be able to send it to me too?

    - - - Updated - - -

    Can you reload the link?



  17. #77
    Member sano26's Avatar
    Join Date
    Jul 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Post Re: Help! I deleted the firmware from my DSP controller

    Quote Originally Posted by cenicero View Post
    Is that an executable file? Like 'Setup(RZTH501)_E_200721.exe'?

    I have the following files:
    0501_1.0_Menu C.txt (1.91KB)
    0501_1.0_Menu E.txt (2.07KB)
    RZNC-D5416-1.2(zhb36)_init.NEWBIN2 (63.2KB)
    RZNC-D5416-1.2(zhb981)_normal.NEWBIN2 (172KB)
    zhbLabel501_C_v17.label (24.4KB)
    zhbLabel501_E_v17.label (29.0KB)

    Maybe the file that you are talking about is one of those '.NEWBIN2'? Which one of them?

    I sent you a PM with my email address.
    same problem for me



  18. #78
    Member sano26's Avatar
    Join Date
    Jul 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Help! I deleted the firmware from my DSP controller

    i have same problem please help me



  19. #79
    Member
    Join Date
    Nov 2011
    Location
    india
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Help! I deleted the firmware from my DSP controller

    I can solve RichAuto A11E/S and 0501 DSP BLANK DISPLAY PROBLEM, SEND IT TO ME Phone & WhatsApp No. +919845352938



  20. #80

    Default

    Quote Originally Posted by nogeso View Post
    hi mecanicu

    As I wrote in my email I have solved the problem - in machine setup disable the hard limit switches and the problem is solved

    regards

    nogeso
    Hello how did you fix the problem?



Page 4 of 5 FirstFirst 12345 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help! I deleted the firmware from my DSP controller

Help! I deleted the firmware from my DSP controller