Esprit Cam Vise


Results 1 to 4 of 4

Thread: Esprit Cam Vise

  1. #1
    Registered mecanotech's Avatar
    Join Date
    Dec 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Esprit Cam Vise

    Hello,

    Is it possible to insert a functional vise in Esprit Cam? For instance, if I declare my stock as 30x100x100, i want to be able to open my vise and insert my stock there.
    I have seen some videos where there was a vise inserted but it didn't show how.

    Also, it would be interesting to use this vise as a template.

    Thank you.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2012
    Location
    America
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Re: Esprit Cam Vise

    Esprit Cam Vise-capture-jpg

    is this what you want???



  3. #3
    Registered mecanotech's Avatar
    Join Date
    Dec 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Esprit Cam Vise

    yes. and depending on the size of my part, I want to open or close the vise. Thx



  4. #4
    Member
    Join Date
    Jan 2007
    Location
    croatia
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Esprit Cam Vise

    In esprit 2018 you have to make assembly of your part or stock and vice, and then import it to your program. For functional vice, you have to use Esprit TNG.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Esprit Cam Vise

Esprit Cam Vise