Problem Running the Part Flip Command


Results 1 to 3 of 3

Thread: Problem Running the Part Flip Command

  1. #1
    Josees's Avatar
    Join Date
    Dec 2018
    Location
    São Paulo
    Posts
    1
    Downloads
    0
    Uploads
    0

    Post Problem Running the Part Flip Command

    Hi Guys, I'm having a problem with running the Part Flip Command. I've programmed one side of my part, and then when I tryed to flip the part to programm the other side, I pick the geometry and the features to do the command Lathe Part Flip and It just don't work, the window just don't appears. I've already check the layers, the group geometry. I tryed to run the command Lathe Part Flip without pick the features and geometry and an advise is shown saying that I should group select the geometry and features to flip before running the flip part command. Everything is OK, but when I pick the geometry and features and pick the command Lath Part Flip, It just doesn't work. Can you guys help me with this? Tks



  2. #2
    Registered
    Join Date
    Mar 2012
    Location
    America
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Re: Problem Running the Part Flip Command

    what version u r using?



  3. #3
    Member
    Join Date
    Jul 2008
    Location
    USA
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: Problem Running the Part Flip Command

    I had the same problem, so I contacted Esprit. Their AE's are fantastic! There was a problem with our version, so they sent a link for the latest release. Uninstall our version and accessories, then install new version and accessories. Works great now. ----------- John



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem Running the Part Flip Command

Problem Running the Part Flip Command