Need help editing asc post file for Esprit.


Results 1 to 9 of 9

Thread: Need help editing asc post file for Esprit.

  1. #1
    Registered
    Join Date
    Feb 2011
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Need help editing asc post file for Esprit.

    My lathe post is posting out in feed per inch, I need it to post feed per rev.
    I add chip feed rate according to Esprit Help and no go. this is really no good.

    Similar Threads:


  2. #2
    Member dcoupar's Avatar
    Join Date
    Mar 2003
    Location
    USA
    Posts
    2932
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Den Man View Post
    My lathe post is posting out in feed per inch, I need it to post feed per rev.
    I add chip feed rate according to Esprit Help and no go. this is really no good.
    What version of Esprit are you running?
    Are you sure the Feed Unit in the operation is set to Per Revolution?



  3. #3
    Registered
    Join Date
    Feb 2011
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Hey dcoupar, I'm using Esprit 2009 and Per Revolution is set for .002 Esprit help says "Use the formatable code keyword CHIPFEEDRATE". I edit the ASC file and still get feed per inch. This is for a TL-2 HAAS Lathe.



  4. #4
    Member dcoupar's Avatar
    Join Date
    Mar 2003
    Location
    USA
    Posts
    2932
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Den Man View Post
    Hey dcoupar, I'm using Esprit 2009 and Per Revolution is set for .002 Esprit help says "Use the formatable code keyword CHIPFEEDRATE". I edit the ASC file and still get feed per inch. This is for a TL-2 HAAS Lathe.
    I no longer have access to E2009, but I just checked this one for a Haas mill turn in E2012, and it outputs G97 and correct fpr. Rename it to a .asc extension and see if it works in e2009.

    Attached Files Attached Files


  5. #5
    Registered
    Join Date
    Feb 2011
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default ASC file-TL-2 HAAS Lathe.

    Thanks dcoupar, this works fine.



  6. #6
    Registered
    Join Date
    Jan 2012
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    did you get this fixed?



  7. #7
    Registered
    Join Date
    Feb 2010
    Location
    costa rica
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Need help editing asc post file for Esprit.

    Maybe a stupid question , dou you have set the feed rate in the general setting on feed per rev or feed per minute , where is this happening specific cycle driling , od roughfing ? let me know to check if I can help you



  8. #8
    Registered Swissm's Avatar
    Join Date
    Aug 2014
    Location
    Arizona
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Did any one have post for cnc swiss screw machines ASC
    EMS file machine set up?
    For stars tsugamis or Citizens?
    Thanks



  9. #9
    Member
    Join Date
    Nov 2017
    Location
    Portugal
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Need help editing asc post file for Esprit.

    Hello
    I'm starting to work with Esprit CAM
    Any of you have any Esprit cam post processor for swiss lathe?

    Possible to send by email - mavdomingues@gmail.com
    I would really appreciate
    thank you



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help editing asc post file for Esprit.

Need help editing asc post file for Esprit.