EnRoute Rapid Texture Problem


Results 1 to 15 of 15

Thread: EnRoute Rapid Texture Problem

  1. #1
    Registered
    Join Date
    Feb 2010
    Location
    usa
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default EnRoute Rapid Texture Problem

    Did the upgrade to 4.1 to take advantage of the rapid texture tool...Watched the vids at http://www.technoisel.com/CNC_Router...ts/Enroute.htm
    The 2nd video uses an auto trim function for applying the texture to the sign outline...my problem is after selecting my wave profile, i can't get the outline to select...can't figure out what i am doing wrong!
    On another note...i have been using Pro for 2 years...like the software & new innovations,however, Scanvec needs to follow up with detailed user info to help lay-people take advantage of the new innovations in their software.
    I would appreciate any other links to vids on Rapid Texture use...Thanx.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2010
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    I just upgraded to 4.1, but I can't see the videos to try to answer your question.



  3. #3
    Registered
    Join Date
    Feb 2010
    Location
    usa
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default

    Thanx for responding.



  4. #4
    Registered
    Join Date
    Dec 2003
    Location
    PA
    Posts
    48
    Downloads
    0
    Uploads
    0

    Default

    Here is the correct link............

    http://www.techno-isel.com/CNC_Route...ts/Enroute.htm

    Have fun,

    Tom in PA



  5. #5
    Registered
    Join Date
    Feb 2010
    Location
    usa
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Tutorials

    Anyone know if SAI will be doing a Rapid Texture tutorial or if there are any videos other than the ones in my original post?



  6. #6
    Registered
    Join Date
    Dec 2003
    Location
    PA
    Posts
    48
    Downloads
    0
    Uploads
    0

    Default

    As far as I know these are the only Rapid Texture videos that have been done, officially. The second video showing the auto trim function is a future feature, yet to be released. It will save a bunch of time when released.

    Good Luck,

    Tom in PA



  7. #7
    Registered
    Join Date
    Feb 2010
    Location
    usa
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Thanks

    Thanks Tom...your last name wouldn't be Penner by any chance?



  8. #8
    Registered
    Join Date
    Dec 2003
    Location
    PA
    Posts
    48
    Downloads
    0
    Uploads
    0

    Default

    No, but Tom Penner is a very good friend and business associate of mine. He installed my Multicam, back in the day, and we have been working with each other ever since. They call him Mr. Enroute for a reason.

    Good Luck,

    Tom in PA



  9. #9
    Registered
    Join Date
    Apr 2007
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    6 degrees of separation! Google Alerts told me about this thread,

    I have lurked on CNC Zone but not participated, since I have been trying to get a few other projects launched. I am working on a rapid PANEL and rapid texture (panel is the new tool in 4.1 that takes a single seed contour and creates a series of 3D lines that can be cut rapidly, rapid texture is the new parametric textures that were introduced with 4.0) series of training movies. They are a great set of tools but kind of hard to describe in a general manner and I have been told OFTEN <grin> that my detailed videos are wonderful sleep aids. I am also waiting for the "official" release with the improvements to Rapid Panel before doing too many movies, since I don't like showing vaporware just features we ALL can use.

    I work best with specific questions, so if you have them feel free to let me know and I will get some done for you and post them on my website

    http://www.LearnEnRoute.com

    You can contact me direct tom 'at' LearnEnRoute.com and I'll try to stay current here too.

    Thos.



  10. #10
    Registered
    Join Date
    Dec 2003
    Location
    PA
    Posts
    48
    Downloads
    0
    Uploads
    0

    Default

    Thanks for chiming in Mr. Penner. Glad to have you aboard.

    Later,

    Tom in PA



  11. #11
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    107
    Downloads
    0
    Uploads
    0

    Default

    I upgraded to 4.0 Pro when it first came out. Never heard there was a 4.1 revision. How do I get 4.1? Either Tom please HELP!



  12. #12
    Registered
    Join Date
    Feb 2010
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by nwrepair1 View Post
    I upgraded to 4.0 Pro when it first came out. Never heard there was a 4.1 revision. How do I get 4.1? Either Tom please HELP!
    Go here:
    http://www.cnczone.com/forums/showthread.php?t=86276



  13. #13
    Registered
    Join Date
    Feb 2010
    Location
    usa
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Upgrade info

    This is how I did it...after you receive your new key...they will send you alink for the installer files...you can contact SAi at the following link..
    http://www.saintl.biz/Contact_Info26.asp

    Please read the steps below to order your key for EnRoute 4.1.0.22. This came directly from Scanvec.

    “There is no charge for the update, but to stay compatible with new operating systems we had to make a change to a new type of key so there is a small hardware upgrade charge of $50. There are a lot of improvements in the new version including a really cool tool called Rapid Texture that is part of EnRoute Pro. This tool allows you to create really nice textured cabinet doors and signs and other textured pieces (info below). To obtain the new key, please have the customer send a PO via email to orders@saintl.biz with the following info: (it can just be an email if they don’t have a PO form)

    • PO Number (can just be the date)
    • Key number(s) to be replaced and list the price of $50 each in your email or PO
    • Ship To address
    • Ship Method (Ground, 2-Day, Overnight)
    • Method of Payment (Request a return call to provide credit card info)
    • Any other info you want to include



  14. #14
    Member
    Join Date
    Jan 2005
    Location
    USA
    Posts
    107
    Downloads
    0
    Uploads
    0

    Default

    Thanks ClassicDoors.



  15. #15
    Activation process Kcarpenter1986's Avatar
    Join Date
    Nov 2018
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: EnRoute Rapid Texture Problem

    Hello..... could any one help me

    Would you by any change have a copy of an Enroute 4 installer for the old type dongal.

    I have lost the cd and now need it

    Thank you in advance



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EnRoute Rapid Texture Problem

EnRoute Rapid Texture Problem