Can someone help me ?


Results 1 to 8 of 8

Thread: Can someone help me ?

  1. #1
    Member space670's Avatar
    Join Date
    Dec 2010
    Location
    Norway
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Can someone help me ?

    I have 4 rou files I would like to convert to dxf if someone could be so kind to help me I would bee werry grateful.
    I think its Enrouter 4 files if I do remember correct.

    Attached Files Attached Files
    CNC 6040 Router Engraver Drilling and Milling Machine_Mack 3 / da Vinci 1.0 Aio 3D Printer 500 x 600 mm laser cutter/engraver 2500 mW


  2. #2
    Member
    Join Date
    Sep 2005
    Location
    United States
    Posts
    1487
    Downloads
    0
    Uploads
    0

    Default Re: Can someone help me ?

    You mean EnRoute 4 don't you? Like> https://www.axyz.com/us/enroute/

    Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP


  3. #3
    Member space670's Avatar
    Join Date
    Dec 2010
    Location
    Norway
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: Can someone help me ?

    Yes I think it is that, can you convert them?
    I would really appreciate it.
    It is files for this table we made.
    Butt I forgot to convert them before we sold our machine.

    Can someone help me ?-281-jpg

    CNC 6040 Router Engraver Drilling and Milling Machine_Mack 3 / da Vinci 1.0 Aio 3D Printer 500 x 600 mm laser cutter/engraver 2500 mW


  4. #4
    Member
    Join Date
    Sep 2005
    Location
    United States
    Posts
    1487
    Downloads
    0
    Uploads
    0

    Default Re: Can someone help me ?

    No I can not, but do you have the gcode files perhaps on a USB drive or some other place?

    Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP


  5. #5
    Member
    Join Date
    Jul 2009
    Location
    USA
    Posts
    62
    Downloads
    0
    Uploads
    0

    Default Re: Can someone help me ?

    I could not open the one file "Svensk_Bondestil_Benk_Gravert_Witches.rou" with Enroute, it might be corrupt. But here are the other 3 exported from Enroute as DXFs.

    Attached Files Attached Files


  6. #6
    Member space670's Avatar
    Join Date
    Dec 2010
    Location
    Norway
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: Can someone help me ?

    Quote Originally Posted by Todd Zuercher View Post
    I could not open the one file "Svensk_Bondestil_Benk_Gravert_Witches.rou" with Enroute, it might be corrupt. But here are the other 3 exported from Enroute as DXFs.
    Thank you very much, I owe you one
    Have a nice day.

    CNC 6040 Router Engraver Drilling and Milling Machine_Mack 3 / da Vinci 1.0 Aio 3D Printer 500 x 600 mm laser cutter/engraver 2500 mW


  7. #7
    Member
    Join Date
    Jul 2009
    Location
    USA
    Posts
    62
    Downloads
    0
    Uploads
    0

    Default Re: Can someone help me ?

    No problem, You're lucky I even saw this post, this is the 1st time I've checked this forum in a very long time.

    I took a closer look at the file I could not open, and it is actually a machine code file (some dialect of G-code). Guessing you may have accidentally over written the Enroute file outputting code to the machine once. Looking at it in Backplot I am guessing it is pretty much the same as the shape in the file "Svensk_Bondestil_Benk_B_400_H_370.rou" but with a little different tool pathing (no Idea if the scale is the same). The v-carving part is using many passes in the g-code file vs 1 pass in the Enroute one.



  8. #8
    Member space670's Avatar
    Join Date
    Dec 2010
    Location
    Norway
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: Can someone help me ?

    Thanks again, I looked at the files and the files you converted is the ones I need.
    The last one is most likely with a symbol in the midle.
    I found a photo of it.

    Can someone help me ?-svensk_bondestil_benk_gravert_witches-png Can someone help me ?-serendip-bord2-018-jpeg

    CNC 6040 Router Engraver Drilling and Milling Machine_Mack 3 / da Vinci 1.0 Aio 3D Printer 500 x 600 mm laser cutter/engraver 2500 mW


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Can someone help me ?

Can someone help me ?