Never used Enroute, but you most likely need to enter the tool numbers in Enroute. Most if not all CAM software works that way.
Hi all, I am new to Enroute and so far am not liking the software very much. Though it has some awesome tools.
This is my question. We have a MultiCAM 1000 with a 9 tool changer. We have the tools defined under the machine settings dialogue box.
But when I programmed a strategy with two different tools from the default tool library it did not seem to assign different tool numbers in the code. Was this because Enroute is not that smart in making a substitute assignment from the tools defined in the machine settings. Or do I need to create a custom tool library that has an exact copy of all of the tools which are in the machine setup tools so that Enroute can properly assign the tool numbers for the strategy.
For a time we had the tools removed from the tool changer but they were still defined in Enroute in the machine tool settings. We were dropping tools due to other problems which we have sinced fixed. Does Enroute talk so much to the controller that it knows when and if the tools are actually in the holders. Assuming the Multicam controller software had the holder defined as not having tools there.
Also, there did not seem, or maybe I missed it, a place to define the tool number in the custom tool library in Enroute.
Similar Threads:
Never used Enroute, but you most likely need to enter the tool numbers in Enroute. Most if not all CAM software works that way.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
There does not seem to be a place to do it in the custom tool library. It is only in the machine setup. The other cam software that I have used usually defines the tool number in the tool library. Now that we have the tools back in the tool changer I will be experimenting more.