setting material to bottom of plate


Results 1 to 2 of 2

Thread: setting material to bottom of plate

  1. #1
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Post setting material to bottom of plate

    I am trying to make a constant dado using Enroute 6 Pro. My need is to make a dado on two cabinet parts and cut shelves to fit between. I have set up the plate thickness to the material which is .77", and I want the dado to be .375" so when I cut my cross pieces to be .75" shorter than the overall of the cabinet. So I would subtract .375" from .77" getting a depth of cut to .395". I have define plate to the size of the material .77" and clicked button Surface to bottom of plate. All works fine till I have to reboot machine the next day to continue cutting parts. Any ideals on why this is happening?

    Similar Threads:


  2. #2
    RoFlo's Avatar
    Join Date
    Dec 2018
    Location
    Connecticut
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    That's more than likely a machine issue and not an Enroute issue. What is happening when you reboot? Anytime I restart/reboot my machine (Multicam) I have to reset the machine surface.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

setting material to bottom of plate

setting material to bottom of plate

setting material to bottom of plate