setting material to bottom of plate


Results 1 to 2 of 2

Thread: setting material to bottom of plate

  1. #1
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Post setting material to bottom of plate

    I am trying to make a constant dado using Enroute 6 Pro. My need is to make a dado on two cabinet parts and cut shelves to fit between. I have set up the plate thickness to the material which is .77", and I want the dado to be .375" so when I cut my cross pieces to be .75" shorter than the overall of the cabinet. So I would subtract .375" from .77" getting a depth of cut to .395". I have define plate to the size of the material .77" and clicked button Surface to bottom of plate. All works fine till I have to reboot machine the next day to continue cutting parts. Any ideals on why this is happening?

    Similar Threads:


  2. #2

    Join Date
    Dec 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    That's more than likely a machine issue and not an Enroute issue. What is happening when you reboot? Anytime I restart/reboot my machine (Multicam) I have to reset the machine surface.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

setting material to bottom of plate

setting material to bottom of plate