Jigsaw Weld


Results 1 to 2 of 2

Thread: Jigsaw Weld

  1. #1
    *Registered User* royawd's Avatar
    Join Date
    Nov 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Jigsaw Weld

    Hello all,
    I've been tinkering with these center mullions for a lot longer than I care to admit. I've managed to mostly reverse engineer a previous drawing. What is happening: when I start using Jigsaw Weld for the inside pattern it doesn't seem to detect where some of the lines intersect. Yet if my outside square is a 1/4" smaller everything works perfectly.
    The more and more I play with this the closer I get but in this current state nothing seems to work in my favor. I've attached the .dwg file if anyone cares to take a look.

    Similar Threads:
    Attached Files Attached Files


  2. #2
    *Registered User* royawd's Avatar
    Join Date
    Nov 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Jigsaw Weld

    Follow up from EnRoute and got the drawing parts resolved! Instead of using the Jigsaw feature I could have used the Extend/Trim Line tool and just trim boundary lines. This pulls the overlaps out and allows me to set a contour toolpath. Just have to choose to follow the contour line on the parameters. It doesn't come out 100% the way I want BUT at least I now know of other options instead of being stuck with the Jigsaw tool.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Jigsaw Weld

Jigsaw Weld

Jigsaw Weld