New Hermes schematic

Results 1 to 1 of 1

Thread: New Hermes schematic

  1. #1
    Member
    Join Date
    Sep 2005
    Location
    usa
    Posts
    169
    Downloads
    0
    Uploads
    0

    Default New Hermes schematic

    Just thought I would share this schematic I have.
    It is for the NH3200 but the ep controller is pretty much the same as the 3400.
    In the schematic the z axis is shown with a solenoid operated axis, the wiring is still valid for a stepper motor.
    I forget it has been a long time since I made this but the schematic shows from the driver board ribbon cable to the rectangluar connector on the back to the table cable and the connecting jacks for each motor or limit switch.

    Similar Threads:
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

New Hermes schematic

New Hermes schematic

New Hermes schematic