here is the output file for new hermes v3400 via engravelab

my machine ignores all the PU moves and PZ moves...my machine goes to
z start position and then igmores all pu and z moves and then when
program done my machine goes to z up home

does anyone know if engravelab works with new hermes and if so can someone post a proper sample output file...of a simple rectangle with a few passes at diff depths so i can see z callouts?

IN;PA;
!VZ36;
PU0,4063;
PU;
!PZ 102,100;
PD0,3047;
PD1016,3047;
PD1016,4063;
PD0,4063;
PU;
!PZ 203,100;
PD0,3047;
PD1016,3047;
PD1016,4063;
PD0,4063;
PU;
!PZ 305,100;
PD0,3047;
PD1016,3047;
PD1016,4063;
PD0,4063;
PU;
!PZ 406,100;
PD0,3047;
PD1016,3047;
PD1016,4063;
PD0,4063;
PU;
!PZ 508,100;
PD0,3047;
PD1016,3047;
PD1016,4063;
PD0,4063;
PU;
SP;

Similar Threads: