- Just purchased Gravograph M40 (2nd hand) DIDNT KNOW about dongle =/
-
Member
Just purchased Gravograph M40 (2nd hand) DIDNT KNOW about dongle =/
Hi guys,
Long time lurker of CNC zone, thank you guys for always having great insight. I recently invested in a gravograph M40 which I was excited about. The person I purchased it from ensured me that graveograph would be helpful in providing me with access to their software. Boy was I / he wrong, basically Gravograph told me my machine was as good as a boat anchor until I dropped another 2k on software alone!!! My home burned down last month, so needless to say, I dont have that kind of money to drop on anything, the machine was my hope for getting back on my feet and I was lucky to get that. I don't know what to do at this point and was wondering if anyone had any ideas.
Thanks@
Similar Threads:
-
-
Member
Re: Just purchased Gravograph M40 (2nd hand) DIDNT KNOW about dongle =/
I dont think you need dongle to send a file to the machine...but you do have to have software tgat has a post processor for it.. the dongle is only for use of their proprietary software
-
Re: Just purchased Gravograph M40 (2nd hand) DIDNT KNOW about dongle =/
I have the same issue. What other software options are out there to be able to use the machine for simple engraving tasks? I downloaded a trial for engravelab but that says there is an output issue. Thanks in advance for any help, sorry I am very knew to this world
-
Member
Do u still have the old m40g
- Just purchased Gravograph M40 (2nd hand) DIDNT KNOW about dongle =/
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules