DIY engraver, running Artcam. When I send a perfect circle to engraver it gives me an oblong cut. This happens with every object I send to engraver. Somehow the output never duplicates the input resolution or size specifications whether I input mm or inches. When I jog any axis with setting of 10mm it will only travel 5mm using grbl controller..
Update: x and z axis are responding accurately, it's the y axis that's only traveling half the distance of the
command sent? Would this be a problem with the lead screw?
Similar Threads:
Last edited by bjwx2; 11-05-2018 at 12:36 PM. Reason: Added info
Thanks for the reply, I'll check that out!
You're right, never dawned on me the leadscrews might be different as I ordered them all from the same vendor, thanx!