Need Help! OPERATING MANUAL NEEDED FOR HERMES 34000 VANGUARD

Results 1 to 6 of 6

Thread: OPERATING MANUAL NEEDED FOR HERMES 34000 VANGUARD

  1. #1
    Registered
    Join Date
    Aug 2017
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Lightbulb OPERATING MANUAL NEEDED FOR HERMES 34000 VANGUARD

    I know this is a old machine but I was looking for Manuals for the Hermes Vanguard 3400.
    I don't know if this machine is worth the effort to get working again but so far im flying blind without any info on the machine.
    The EP controller will not boot up also, and I replaced the CMOS battery.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2007
    Location
    USA
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: OPERATING MANUAL NEEDED FOR HERMES 34000 VANGUARD

    I can help with the manual if you still need it. Any luck with booting the EP?



  3. #3
    Registered
    Join Date
    Oct 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    I have the Vanguard EP control module manual with all cable connectors drawing if you need. PDF booklet is to large for this forum. Please contact me if needed.
    Jean-Pierre



  4. #4
    Registered
    Join Date
    Jul 2007
    Location
    USA
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: OPERATING MANUAL NEEDED FOR HERMES 34000 VANGUARD

    Still need help?



  5. #5
    Member Bltpruf's Avatar
    Join Date
    Apr 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by mrbillsa View Post
    Still need help?
    Yes I could use some help



  6. #6
    Member mstrmke's Avatar
    Join Date
    Nov 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: OPERATING MANUAL NEEDED FOR HERMES 34000 VANGUARD

    Quote Originally Posted by jpgauvreau View Post
    I have the Vanguard EP control module manual with all cable connectors drawing if you need. PDF booklet is to large for this forum. Please contact me if needed.
    Jean-Pierre
    I am looking for this, if it's still available.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OPERATING MANUAL NEEDED FOR HERMES 34000 VANGUARD

OPERATING MANUAL NEEDED FOR HERMES 34000 VANGUARD

OPERATING MANUAL NEEDED FOR HERMES 34000 VANGUARD