Where are you located?
If it were me, I would buy a used machine and upgrade the controls and make any mechanical repairs needed. That way all the hard (and expensive) work is already done, the controls are the easy part.
Hello everyone,
I want to get into CNC cutting, I was planning to buy a table from China and a plasma, hypertherm locally.
Underwhelming feedback from suppliers and general negativity towards Chinese manufacturers have steered me away from this.
I have now decided to build the table myself, this would be a heavy 3m length table with steel frame and gantry.
The last couple of weeks of research gave me a rough direction but I need someone with experience to Design the machine, do the maths etc and provide the drawing (can be a modified existing design)
I figured here was the best place to acquire help for this Job.
Would like to agree a fixed price for the work, anyone interested?
Similar Threads:
Where are you located?
If it were me, I would buy a used machine and upgrade the controls and make any mechanical repairs needed. That way all the hard (and expensive) work is already done, the controls are the easy part.
Jim Dawson
Sandy, Oregon, USA