We are in need of an experienced machinist, that already has years of measuring and machining experience on both lathe and mills.

The position we are trying to fill will be for a Mazak Integrex (mill/turn) and/or Mazak Hypoquadrex (lathe with live spindle). We have one operator that is programming and setting up for two integrex, and will be able to do some training, but has jobs are also trying to be done. The Hypoquadrex that we have is new to the shop and the same operator we currently have is going to be getting stretched too thin to try and keep all programmed and setup.

Must haves:

1) years as a machininst experience
2) experience with measuring insturments: vernier calipers, micrometers, depth mics, height gage, ect...
3) able to read blue prints efficiently
4) comfortable on computers and can easily navigate through windows (Computer Savvy)

Preferable

1) Mazak setup and programming experience
2) More critical to have lathe experience than milling experience

Wages will be based off prior experience and will range from $13-18/hr starting pay. Medical insurance after probation period, becomes fully paid, yearly profit sharing (can be very large $1000's), retirement plan with percentage put in by business.

If interested please contact Chad Ashley (Production Manager)

See signature if trying to contact directly, or IM me through CNCzone

Similar Threads: