Reply with QuoteHi,
You say that there are 11 views. When I open it in Bobcad I only see the solids view. Am I missing something. If I could get a dimensioned print I would ask my boss to quote it so that you can decide what to do.
ErnieD
RFQ Aluminum plate work
I'm curious if it would be cost effective to contract these pieces out. 1/4 6061 aluminum, 20 pieces.
Similar Threads:
Proud owner of a Series II Bridgeport.
RFQ Aluminum plate work
Hi,
You say that there are 11 views. When I open it in Bobcad I only see the solids view. Am I missing something. If I could get a dimensioned print I would ask my boss to quote it so that you can decide what to do.
ErnieD
Are you asking for a quote?
I would say 1 hour programming time since you have the solid and ~10-15 min floor to floor for production... not including setup
most shops charge $70-$110 hour
then you have to factor in tooling and material.
you're looking at paying anywhere from 20 to 40 bucks a part
[edit]
^^^^^^^^^^
the number 11 that you saw was the number of times the file was downloaded.
http://smackaay.com
Visit my site
what are the holes tapped I'm guessing?
Thank you
Wow, that was fast. Job has been awarded. Thanks everyone.
Proud owner of a Series II Bridgeport.
