Build Thread Emco F1P rebuild


Results 1 to 1 of 1

Thread: Emco F1P rebuild

  1. #1
    Member Kunda38's Avatar
    Join Date
    Jun 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Emco F1P rebuild

    Hello everyone.

    Did buy a emco F1P in bad shape..
    Going to do a rebuild whit new closed loop motors and acorn.I will post pictures of my rebuild
    All the motor mounts was missing so i had a friend water cut new motor mounts in 3mm Stainless steel for me.
    One of the 80 tooth mxl pulleys was missing so 3 new pulles was machined out of pulley stock.Did change from 80 to 40 tooth on all axis.Hope it´s going to work.
    That´s what i have done so far in the rebuild.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Emco F1P rebuild-20190416_140743-kopia-2-jpg   Emco F1P rebuild-20190607_194536-2-jpg   Emco F1P rebuild-20190621_170418-2-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Emco F1P rebuild

Emco F1P rebuild