Need Help! My PC Does Not Connect to the CNC


Results 1 to 2 of 2

Thread: My PC Does Not Connect to the CNC

  1. #1
    Registered
    Join Date
    Aug 2017
    Location
    Mexico
    Posts
    2
    Downloads
    0
    Uploads
    0

    Unhappy My PC Does Not Connect to the CNC

    1. I own a Milling machine EMCO Concept MILL 55, I have a connection to PC with Windows XP, controller sinumerik a few months ago I stopped using the machine

      now after three months without used, it does not generate a connection between the PC and the CNC
      Do not throw me an error message
      Just do not connect, you do not hear the typical blow, check the ethernet connection on the pc, sending data from the pc to cnc, but does not resive cnc data to pc


    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2013
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: My PC Does Not Connect to the CNC

    I have had the same problem with my concept 55. The internal motherboard was bad on my mill. I did a visual inspection and found 10 different capicators bad. I would pull the motherboard out and bench test it to see if it boots up.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

My PC Does Not Connect to the CNC

My PC Does Not Connect to the CNC