Need Help! Process of transferring the control program to the machine controller using a floppy.


Results 1 to 3 of 3

Thread: Process of transferring the control program to the machine controller using a floppy.

  1. #1
    Member _Romanos_'s Avatar
    Join Date
    Aug 2022
    Posts
    3
    Downloads
    0
    Uploads
    0

    Post Process of transferring the control program to the machine controller using a floppy.

    Hi all!

    I recently managed to buy an EMCO TURN 120 CNC lathe with an EMCOTRONIC TM02 controller, in very good condition, and I faced such a problem as loading the control program into the machine.

    The controller has a floppy receiver, a floppy for 3.5 inch floppy disks and I, naively, dared to assume everything would be simple, you load the control program onto a floppy disk, and then insert it into the machine controller and load it into memory, but not everything is as easy as I expected .

    The controller does not understand the floppy at all, I tried to format the floppy in the controller, but it gives an error that the floppy is not ready. I note that the floppy disk is new and works properly.

    Maybe there is someone on the forum who has encountered such a problem, or maybe someone knows the complete process of transferring the control program to the machine controller using a floppy disk?
    The third day I try to understand how it works and there is no success.
    I will be grateful for any information.

    Best regards,
    Roman

    Similar Threads:


  2. #2
    Member Vlod's Avatar
    Join Date
    Apr 2022
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default Re: Process of transferring the control program to the machine controller using a flo

    You need software that called WinNC I think. It runs on windows95. And floppys formatted in DOS.
    Better read the manual https://manualzz.com/doc/18438809/ht...ce-emcotronic_...



  3. #3
    Member _Romanos_'s Avatar
    Join Date
    Aug 2022
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Process of transferring the control program to the machine controller using a flo

    Thank you friend for your help, now I at least understand in which direction I should move.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Process of transferring the control program to the machine controller using a floppy.

Process of transferring the control program to the machine controller using a floppy.