- Manual chuck on Emco Compact 6P / 120P / 220P
-
Member
Manual chuck on Emco Compact 6P / 120P / 220P
Hello all,
Specifically regarding the Compact 6P, although the answer's probably the same for the 120P / 220P - Can the pneumatics for the chuck / collet be easily removed so that a manual chuck can be fitted, allowing use of the through-spindle bore ? (Without removal / replacement of the whole headstock and spindle with the standard non-P unit.)
Thanks.
Similar Threads:
-
-
Member
Re: Manual chuck on Emco Compact 6P / 120P / 220P
The similar threads have pointed me to this which pretty much answers my question, it looks like the pneumatics have just been unbolted from the spindle:
https://www.cnczone.com/forums/showt...%20CNC%20lathe
- Manual chuck on Emco Compact 6P / 120P / 220P
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules