Hello everyone,

I have been happy owner of vintage "EMCOturn 340" lathe since few years. Unfortunately I have problem with, at this time, a little old (1983) electronics in this great machine.

The main computer in this machine is Sinumerik 3T/0 (without CRT) and PLC (SPS) is Simatic S5-010W (on the right-hand side of the picture as an attachment). I have almost whole documentation like schematics and manuals. Unfortunately I haven't ladder diagram for Simatic S5-010W, so this is the main problem with maintenance this machine.
Ladder diagram for EMCOturn340 (Simatic S5-010W PLC)-simatics5-010w-jpg
Ladder diagram for EMCOturn340 (Simatic S5-010W PLC)-dsc01455sm-jpg

Thus, I would greatly appreciate if you could send me file with ladder diagram for this PLC.

As this matter is of great importance to me, I would greatly appreciate a prompt reply.

Greatings!

Similar Threads: