- Newbie- How to move the tailestock with M20/M21
-
Member
How to move the tailestock with M20/M21
Hallo,
I have an tailstock I can move manual with 2 buttons. But when I try to write some g-code I always get an error.
My Emco Concept Turn 155 is an TCM machine and use 12 tools revolver and 6 was driven tool.
I use C-axel but I can´t find right code to move the tailstock.
I have try to write N10 G0 M21 Z75 etc.
The instructions book.
Unfortunately, it says nothing about how to deal with tailstock.
Do you now any thing about this, please tell me.
Similar Threads:
Last edited by cnc_swe; 02-28-2017 at 01:54 AM.
Reason: wrong spelling
-
-
Member
Re: How to move the tailestock with M20/M21
What is the error? M21, chuck must be clamped, and the tailstock prox must be set according to manual. If prox is not set it, will give error about sleeve position, check your pm.
- Newbie- How to move the tailestock with M20/M21
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules