EMCOTurn 340TC project - Page 4


Page 4 of 4 FirstFirst 1234
Results 61 to 63 of 63

Thread: EMCOTurn 340TC project

  1. #61
    Yups's Avatar
    Join Date
    Nov 2014
    Location
    Holzhausen
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: EMCOTurn 340TC project

    Quote Originally Posted by Kanpowersports View Post
    Can anyone supply me with the H.....M..... List for the hydraulic options. And Setting Data (bits)? I'm unsuccessful at getting my tail stock and parts catcher working.
    Try PLC-MD 3001
    bit 0 to 1
    bit 4 to 1

    Good Luck!



  2. #62
    vfsi
    Guest

    Default Re: EMCOTurn 340TC project

    Yups,
    I would like the parameters that you received from EMCO but it doesn't look like you have enabled PM's. Please use my PM to contact me.
    I have the Contraves drive manual in german for both the spindle and the z-x motor drive if that would help anyone.
    I also have a very customized post processor for Bobcad 20 that does a very good job to output code for all the Emco canned cycles.
    Does anyone have the Foot peddle working to close the collet chuck?



  3. #63
    Member
    Join Date
    Mar 2013
    Location
    US
    Posts
    31
    Downloads
    1
    Uploads
    0

    Default Re: EMCOTurn 340TC project

    hey guys, does the emcoturn 340 come standard with live tooling ?



Page 4 of 4 FirstFirst 1234

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EMCOTurn 340TC project

EMCOTurn 340TC project

EMCOTurn 340TC project