am having a strange error with my Emco 325 with a Fanuc 0-T control
When I run a program we get a 1024 and 1029 alarm. The 1029 is a parity monitoring alarm (not in manual), the 1024 is a tool monitoring error. Emco thinks it is a turret alarm..BUT the turret seems to be turning fine, the tool goes into correct position.
.
Any help would be GREATLY appreciated
Similar Threads:
Did you have any results with your quest for an answer on the 325 1024 alarm issue.am having a strange error with my Emco 325 with a Fanuc 0-T control
When I run a program we get a 1024 and 1029 alarm. The 1029 is a parity monitoring alarm (not in manual), the 1024 is a tool monitoring error. Emco thinks it is a turret alarm..BUT the turret seems to be turning fine, the tool goes into correct position.
.
Any help would be GREATLY appreciated