strange emco 325 issue


Results 1 to 2 of 2

Thread: strange emco 325 issue

  1. #1
    Registered
    Join Date
    Mar 2008
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default strange emco 325 issue

    am having a strange error with my Emco 325 with a Fanuc 0-T control

    When I run a program we get a 1024 and 1029 alarm. The 1029 is a parity monitoring alarm (not in manual), the 1024 is a tool monitoring error. Emco thinks it is a turret alarm..BUT the turret seems to be turning fine, the tool goes into correct position.
    .
    Any help would be GREATLY appreciated

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2003
    Location
    michigan,brighton
    Posts
    123
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ratedr View Post
    am having a strange error with my Emco 325 with a Fanuc 0-T control

    When I run a program we get a 1024 and 1029 alarm. The 1029 is a parity monitoring alarm (not in manual), the 1024 is a tool monitoring error. Emco thinks it is a turret alarm..BUT the turret seems to be turning fine, the tool goes into correct position.
    .
    Any help would be GREATLY appreciated
    Did you have any results with your quest for an answer on the 325 1024 alarm issue.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

strange emco 325 issue

strange emco 325 issue