EMCO PC Turn 50 Lathe


Results 1 to 20 of 20

Thread: EMCO PC Turn 50 Lathe

  1. #1
    Registered
    Join Date
    Dec 2009
    Location
    United Kingdom
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default EMCO PC Turn 50 Lathe

    Hi Everyone, this is my first post on this forum forgive me if this question is in the wrong section

    I have a very good condition EMCO PC Turn 50 Lathe with operating PC, tablet etc that I am thinking of selling to fund a CNC Mill having just purchased a manual Lathe.

    The EMCO was given to me as an upgrade had been purchased at the college where I work, my question is how much should I be asking for when I come to sell it as I have no idea at all about its worth?

    Many thanks, Ken

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2009
    Location
    United Kingdom
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Do you think it would be unrealistic of me to ask for around $480 / £300? seems to be a lot of kit for that sort of money but I am clueless as to what its worth

    Thanks, Ken



  3. #3
    Member RotarySMP's Avatar
    Join Date
    Mar 2004
    Location
    Vienna, Austria
    Posts
    1269
    Downloads
    5
    Uploads
    0

    Default

    Put it in Ebay with a start price of €1 and ship to whole world. Then it will be visible on the whole Ebay system. You will get a fair price (likely far more than the €320 you are talking about.

    Regards,
    Mark


  4. #4
    Registered
    Join Date
    Feb 2008
    Location
    USA
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default I am interested

    Please contact in regards to this kit. I am interested.

    Thank you.

    John.



  5. #5
    Registered
    Join Date
    Dec 2009
    Location
    United Kingdom
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hi Sorry John sold it just last week, Ken



  6. #6
    Registered
    Join Date
    Jan 2010
    Location
    india
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default machines

    I have just bought these two machines in imaculate unused condition complete with pc's however the user manuals are missing and I have no idea how to work them. They are fitted with EOT Cranes control panels but also came with fanuc panels. I would like to use them as they are so can anyone help? please.



  7. #7
    Registered
    Join Date
    Feb 2008
    Location
    USA
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    Hello Aaditya1,

    Tell me what do you need specifically and I might be able to help. I also have the manual for the EMCO Fanuc series O-TC if you are interested.

    Regards,

    John.



  8. #8
    Registered
    Join Date
    Apr 2010
    Location
    __
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    kj



  9. #9
    Registered
    Join Date
    Feb 2012
    Location
    colombia
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default

    hello friends. i bougth an used emco pc turn 50, i have a compatible computer, but the installation disc are broken, anybony can help me to find the correct software to make work my turn... thaks ...



  10. #10
    Member
    Join Date
    Nov 2006
    Location
    Finland
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: EMCO PC Turn 50 Lathe

    Hi.

    I have to write here about EMCO PC TURN 50 lathe a have.

    I have write to emco emails and send web baser reguests. But there is no response - none.

    First i try to get this unit operational again, since it has lost pc and io-card somehow. As they seems to do every case

    Dealer has change since 1995. In Finland there is no one who has repair these machines available anymore. Current dealer sell only model 60 and price is something 10000eur+. It is huge amount for lathe that can be used only for aluminium. So our scholl want real lathe to replace, so i get this unit for free. Later on i found io-card from ebay, but it has no connection. I was again contact to emco - same result than before, no one reply.

    Emco was option when we buy new lathe, but not for real since there is no support when need. We get other manufacturer and now there is 50000eur lathe comming end of month

    However, this small emco is useless now. Any help to get pc cable schematics? I have lathe and fanuc board, floppydisc where program installs, w98 pc with one ISA slot - there is that io-card now. Emco software works ok but lathe does not go reference or do anything.



  11. #11
    Registered
    Join Date
    Feb 2018
    Location
    Finland
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: EMCO PC Turn 50 Lathe

    Quote Originally Posted by AK47 View Post
    Hi.

    I have to write here about EMCO PC TURN 50 lathe a have.

    However, this small emco is useless now. Any help to get pc cable schematics? I have lathe and fanuc board, floppydisc where program installs, w98 pc with one ISA slot - there is that io-card now. Emco software works ok but lathe does not go reference or do anything.
    Do you still have these problems? We just got one running here in Finland and perhaps can help you.



  12. #12
    Alcost's Avatar
    Join Date
    Feb 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    John, I would like to get a copy of the manuals for the Fanuc 0. Also do you know where I can get a copy of wincam. I have Winn and configure.



  13. #13
    Member Deluminati's Avatar
    Join Date
    Aug 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    Im soon to be getting a pc turn 50 with ge fanuc series 0 controller, and just looking around for helpful community as this will be my first cnc machine and may run into problems, i aim to operate it in its standard way, so no retrofitting. So excited!



  14. #14
    Member
    Join Date
    Nov 2006
    Location
    Finland
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: EMCO PC Turn 50 Lathe

    Yes, machine has been as is since last time to try wake it up.



  15. #15
    DNukem's Avatar
    Join Date
    Dec 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Drove 500 miles to get CNC Lathe - Now what

    Quote Originally Posted by mleppanen View Post
    Do you still have these problems? We just got one running here in Finland and perhaps can help you.
    Retiree/CNC Student...
    Just acquired an EMCO PC Turn 50 w/ GE Fanuk Series-O Board.
    I believe it has the ACC upgrade (don't really know what that means...).
    Got the ACC install instructions (Only literature that came with it.) and as near as I can tell the ACC has been installed.
    No Install/Operation manuals, No CDs, No Media, No idea where to start.
    Looking for any CDs, Manuals or Illustrations to get me going.
    Please provide guidance, I will be eternally greatful.



  16. #16
    DNukem's Avatar
    Join Date
    Dec 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Need operational Digital Media and Instruction Manuals

    Retiree/CNC Student...
    Just acquired an EMCO PC Turn 50 w/ GE Fanuk Series-O Control Board.
    I believe it has the ACC upgrade (don't really know what that means...)
    Got the ACC install instructions (Only literature that came with it.) and as near as I can tell the ACC has been installed.
    No install/operation manuals, No CDs, No media, No idea where to start.
    Looking for any CDs, Manuals, Illustrations or guidance to get me going.
    It appears that I may have to dig out one of my old 486 computers... Is that correct?
    Please provide guidance, I will be eternally greatful.

    Dick N.



  17. #17
    Member
    Join Date
    Nov 2006
    Location
    Finland
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: EMCO PC Turn 50 Lathe

    mleppanen, you has not been here for long time, but i still has same problems.



  18. #18
    Member
    Join Date
    Oct 2006
    Location
    USA
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default Re: Need operational Digital Media and Instruction Manuals

    Quote Originally Posted by DNukem View Post
    Retiree/CNC Student...
    Just acquired an EMCO PC Turn 50 w/ GE Fanuk Series-O Control Board.
    I believe it has the ACC upgrade (don't really know what that means...)
    Got the ACC install instructions (Only literature that came with it.) and as near as I can tell the ACC has been installed.
    No install/operation manuals, No CDs, No media, No idea where to start.
    Looking for any CDs, Manuals, Illustrations or guidance to get me going.
    It appears that I may have to dig out one of my old 486 computers... Is that correct?
    If the machine has ACC any PC will do. Contact Emco with your serial number and they will get you all the documentation and software you need.



  19. #19
    Member MauriH's Avatar
    Join Date
    Jan 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by mleppanen View Post
    Do you still have these problems? We just got one running here in Finland and perhaps can help you.
    Hi Leppänen,
    I need help with EMCO PC 50 lathe here in Finland, urgently.
    Terveisin
    Mauri



  20. #20
    Member Deluminati's Avatar
    Join Date
    Aug 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by hiatec View Post
    Hello Aaditya1,

    Tell me what do you need specifically and I might be able to help. I also have the manual for the EMCO Fanuc series O-TC if you are interested.

    Regards,

    John.
    Hi John
    I have a pc turn 50 with the Fanuc series 0 controller, do you have the manual for that?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

EMCO PC Turn 50 Lathe

EMCO PC Turn 50 Lathe

EMCO PC Turn 50 Lathe