Nice work!!
I converted a Denford NovaTurn to Yaskawa AC Sevos, Mesa 6i25 - 7i77, AMC DC Servo Drive for Spindle.
My system is running PathPilot, +- 10V Torque Mode fully closed loop.
Iron-Man
I had some little pittman servos that I thought were on the small side - but so far they seem to be about perfect. Using the existing lead screws and belt reduction.
10.16tpi/2.5mm
2.5:1 reduction
Input scale in inches is 50800 - or .000019" / encoder count.
mesa 5i25
cheap bob
amc pwm/dir imput servo amps.
amc 20a20ac for spindle.
pittman servos and 500 line encoders.
Similar Threads:
Nice work!!
I converted a Denford NovaTurn to Yaskawa AC Sevos, Mesa 6i25 - 7i77, AMC DC Servo Drive for Spindle.
My system is running PathPilot, +- 10V Torque Mode fully closed loop.
Iron-Man
some machining required...
that thing hauls A , especially compared to stock steppers .