- EMCOTURN 220 main drive problem
-
Member
EMCOTURN 220 main drive problem
I recently moved in a EMCOTurn 220 lathe with Emcotronic T1 controller. When I try to start the spindle I get an error message "020: Main Drive Not Ready". I am able to reference both axis's, dry run a program and anything not requiring the spindle. I have very limited documentation and not totally up to speed on this older technology. I am not sure if I am not doing something right or if it is a fault. Everything was running fine on 4/2 before being moved. Has anyone ran into problem before that can point me in the right direction Any help will greatly be appreciated. Jeff
Similar Threads:
-
- EMCOTURN 220 main drive problem
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules