Problem Emcotronic T1 Control (Need Help )


Results 1 to 6 of 6

Thread: Emcotronic T1 Control (Need Help )

  1. #1
    Registered
    Join Date
    Jul 2009
    Location
    Finland
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Emcotronic T1 Control (Need Help )

    Hello everyone.

    Is there anyone who could help me with Emcotronic t1 cnc control.
    I have solved this RS-232 problem and machine works now, but i like to ask help with tool measurements.
    I have set parameters that machine should be able to take measurements with scratching trial workpiece with known dimensions.

    I would like to know prosedure how to take care of this measuring??

    Regards:Tatu

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    167
    Downloads
    0
    Uploads
    0

    Default Re: Emcotronic T1 Control (Need Help )

    U need to push TO button (Shift+T) and go to the field U want to change (Tool number and measuring direction) and push enter.

    here's the manual:
    http://www.kfilipowicz.zut.edu.pl/Pr...structions.pdf



  3. #3
    Registered
    Join Date
    Jul 2009
    Location
    Finland
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Emcotronic T1 Control (Need Help )

    Quote Originally Posted by steryd View Post
    U need to push TO button (Shift+T) and go to the field U want to change (Tool number and measuring direction) and push enter.

    here's the manual:
    http://www.kfilipowicz.zut.edu.pl/Pr...structions.pdf
    Hi
    Thanks for your response.
    Is it too much to ask for more accurate instructions? I have tried this but not succseed.
    When i hit shift+t the led start blinking and display show also x or z blinking.
    What i have to do after this.

    Maybe i'm stuptd, but not succseed yet



  4. #4
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    167
    Downloads
    0
    Uploads
    0

    Default Re: Emcotronic T1 Control (Need Help )

    You should see tool offset list.
    Otherwise It can be like in T2 -You should input the offset number (1-12) and then push enter.
    it will input the values to offset number You wil indicate. But anyhow there should be offset list visible.



  5. #5
    Registered
    Join Date
    Jul 2009
    Location
    Finland
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Emcotronic T1 Control (Need Help )

    Quote Originally Posted by steryd View Post
    You should see tool offset list.
    Otherwise It can be like in T2 -You should input the offset number (1-12) and then push enter.
    it will input the values to offset number You wil indicate. But anyhow there should be offset list visible.
    Hi

    I have set this parameter high ( L0 bit 4 Tool Measuring 0 0,16 Tool measuring with reference workpiece for T1 )
    i think that controller should be capable to automatically calculate values to compensation?
    maybe i have still some parameters missing or i'm doing it wrong.



  6. #6
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    167
    Downloads
    0
    Uploads
    0

    Default Re: Emcotronic T1 Control (Need Help )

    in that case U need to first measure the T1 tool as reference. (it should be in 1 station of the mag.)
    Then go manually to the required height
    push shift->T->number (01this case) ->enter
    This should store the value.
    Im not sure if U wouldn't need to set zero length once for reference (the same procedure but for T00 with empty spindleod some short thing in it) if the machine was out of power for long time.


    I don't have any working emco now so i have to recall it in my memory.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Emcotronic T1  Control (Need Help )

Emcotronic T1  Control (Need Help )

Emcotronic T1  Control (Need Help )