Winnc Daughter card or not?


Results 1 to 2 of 2

Thread: Winnc Daughter card or not?

  1. #1
    Member
    Join Date
    Jul 2009
    Location
    USA
    Posts
    219
    Downloads
    0
    Uploads
    0

    Default Winnc Daughter card or not?

    Hello,
    I recently got an Emcoturn 325-II.

    The pc was seperate from the machine when I bought it. I tried to put the pc in and hook up the cables but I have (1) Cable with no where to plug it in. The connector is about the size of a parallel port cable but it has 3 rows of pins.

    Is there supposed to be a daughter card in the pc for this cable? I haven't powered the machine yet.

    Thanks for any replies,
    Eric

    Similar Threads:


  2. #2
    Registered propellanttech's Avatar
    Join Date
    Sep 2011
    Location
    United States
    Posts
    60
    Downloads
    0
    Uploads
    0

    Default Re: Winnc Daughter card or not?

    Yes, you must have a daughter card. Good luck. If you find one they are extremely overpriced.

    James L



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Winnc Daughter card or not?

Winnc Daughter card or not?