Trouble connecting AXBB-E out puts to relay board


Results 1 to 4 of 4

Thread: Trouble connecting AXBB-E out puts to relay board

  1. #1
    Member
    Join Date
    Dec 2007
    Location
    usa
    Posts
    341
    Downloads
    0
    Uploads
    0

    Default Trouble connecting AXBB-E out puts to relay board

    Hi every one i need a little help with connecting this relay board for outputs, i am not sure if the outputs is a negative coming from the board, output providing ground to complete circuit or something else ,just do not want to let the smoke out.
    I have provided the boards manual and the relay board schematic any help would be greatly appreciated . Trouble connecting AXBB-E out puts to relay board-screenshot-2020-11-29-181924-jpg

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member
    Join Date
    Dec 2007
    Location
    usa
    Posts
    341
    Downloads
    0
    Uploads
    0

    Default Re: Trouble connecting AXBB-E out puts to relay board

    Problem resolved ,i had to put a 1K resistor in line for each out put for the board.



  3. #3
    Member ih8dug's Avatar
    Join Date
    Dec 2020
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Trouble connecting AXBB-E out puts to relay board

    To potentially save me a few weeks how exactly did you wire it?
    I can get the led lights on the board to light up but I can not get It configured with Mach 3?



  4. #4
    Member ih8dug's Avatar
    Join Date
    Dec 2020
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Trouble connecting AXBB-E out puts to relay board

    If it helps anyone else, just wire it as per manual and you set mach3 Ports and pins to Eg;
    port 2 pin1 (not 11 or I1)



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trouble connecting AXBB-E out puts to relay board

Trouble connecting AXBB-E out puts to relay board