School for CNC Service and repair?


Results 1 to 6 of 6

Thread: School for CNC Service and repair?

  1. #1
    Member
    Join Date
    Aug 2016
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default School for CNC Service and repair?

    I've been working at my current job for 13 years as a CNC Operator. For awhile now I've been doing the normal cleaning and minor maintenance stuff. But as stuff breaks I'd like be a little bit more knowledgeable about repairs. We currently have 5 haas vf2 ss, a fadal 88hs and 10 harig ez surfs. I've already found the haas service section of the website for those but as for the others does anyone have any ideas for training on servicing them? Any help would be appreciated

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: School for CNC Service and repair?

    I don't know of any schools for training CNC service techs. Most of this is done by the in-house training at the machine manufacturer, then a lot of on the job training for the field techs.

    Having said that, all of the machines are the same and all of the machines are different. The same in that shafts run in bearings, tables have rails or ways, things are moved around by motors under computer control. Sensors can be encoders, prox sensors, limit switches, photo eyes, and the like. But exactly how all of this works and is controlled is specific to the machine and manufacturer.

    A CNC tech is a machinist, millwright, controls electrician, and a computer geek. And is a journeyman in all of these trades, and most importantly can logically troubleshoot any of the combined systems.

    If your company has a maintenance department, transfer into that and start learning. I spent the first 20 years of my career just learning and mastering the trades above.

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default Re: School for CNC Service and repair?

    Quote Originally Posted by Jim Dawson View Post
    A CNC tech is a machinist, millwright, controls electrician, and a computer geek. And is a journeyman in all of these trades, and most importantly can logically troubleshoot any of the combined systems.
    If your company has a maintenance department, transfer into that and start learning. I spent the first 20 years of my career just learning and mastering the trades above.
    Pretty much mirrors my experience.
    I started out as an Industrial Electrical apprentice, then acquired Industrial Electronics Certification, where I serviced automated assembly line equipment.
    In Canada I got a job with a large company and retro fitted their old assembly line using PLC's, then acquired CNC experience and retro fitted initially using Fanuc , but preferred Mitsubisi.
    Also designed a few small systems.
    Pretty much have to live and dream it

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  4. #4
    Member
    Join Date
    Jun 2018
    Location
    on my feet
    Posts
    962
    Downloads
    1
    Uploads
    0

    Default Re: School for CNC Service and repair?

    from what I've seen is it's on the job training . The best guy I've ever seen used to be a sewing machine repairman . He got a job working for Elliot repairing matsuura's and learned everything on the job . When he was in the shop we knew it was getting fixed before he left and sometimes that literally meant days .
    Most haas tech's I've seen are flat out monkeys who use cell phones to have the factory walk them through the repairs . I doubt they have a second of formal training . It's good though for a guy who is keen to learn

    Millwright training may be the best rounded training that a guy can get but I don't know if they touch on automation such as cnc yet , they didn't when I was trained , but that was also over 30yrs ago

    Last edited by metalmayhem; 05-20-2021 at 09:56 AM.


  5. #5
    Member
    Join Date
    Aug 2016
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by metalmayhem View Post
    from what I've seen is it's on the job training . The best guy I've ever seen used to be a sewing machine repairman . He got a job working for Elliot repairing matsuura's and learned everything on the job . When he was in the shop we knew it was getting fixed before he left and sometimes that literally meant days .
    Most haas tech's I've seen are flat out monkeys who use cell phones to have the factory walk them through the repairs . I doubt they have a second of formal training . It's good though for a guy who is keen to learn

    Millwright training may be the best rounded training that a guy can get but I don't know if they touch on automation such as cnc yet , they didn't when I was trained , but that was also over 30yrs ago
    That's also what I've seen with the haas guys, there are a few that aren't looking up instructions on the computer but for the most part they seem greener than me on some things.



  6. #6
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default Re: School for CNC Service and repair?

    I recall back in the 60's in Europe where Siemens started opening Technician schools, at that time the Automation industry was already in full swing, but there was no one on the shop floor level to service the equipment, such as PLC/CNC etc.
    The maintenance electricians did not quite have the skills, and the graduated engineer's were reluctant to get their hands dirty.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

School for CNC Service and repair?

School for CNC Service and repair?